# Welcome to Sigma!
The only tool you will ever need, tailored for all of your complex needs.
{% hint style="info" %}
Welcome to Sigma, your all-in-one solution for trading and sniping tokens on the Ethereum, Avalanche, Binance Smart Chain, Base Chain, Unichain, Berachin and Solana networks.
{% endhint %}
This cutting-edge tool is designed to offer you a competitive advantage in the fast-paced world of crypto.
Join the club of successful people who rely on Sigma for its speed, simplicity, and comprehensive features. Elevate your experience and capitalize on every opportunity with Sigma.\
\
We proudly present to you the culmination of months of dedicated effort by our team of professional coders and seasoned snipers.\
\
To begin, click the Telegram links below:
**Trading bot:**
{% embed url="" %}
**Sigma Telegram support group:**
{% embed url="" %}
**Or our setup guide:**
# Setup Guide
We focused on simplicity when making the bot, so most of the guide is self-explanatory, but we recommend all of our users, even the experienced ones, to give the guide a read or watch the videos.
{% embed url="" %}
### Quick Start
{% stepper %}
{% step %}
### Open the Sigma Telegram bot
{% embed url="" %}
{% endstep %}
{% step %}
### Press Start
{% endstep %}
{% step %}
### Accept the terms and conditions
{% endstep %}
{% step %}
### Fund your EVM and SOL wallets
{% endstep %}
{% step %}
### Start Trading!
{% endstep %}
{% endstepper %}
### Detailed Guide
{% hint style="info" %}
Interactive guides to walk you through the setup process
{% endhint %}
{% content-ref url="/pages/cV467nCDz83yulv6xKob" %}
[First Start](/getting-started/setup-guide/first-start)
{% endcontent-ref %}
{% content-ref url="/pages/hPcKQefKp92LjImHqOXK" %}
[Important Links](/getting-started/important-links)
{% endcontent-ref %}
{% content-ref url="/pages/eoSPjDsPiX6c4aZ5vHrM" %}
[FAQ](/getting-started/faq)
{% endcontent-ref %}
# First Start
For new Sigma users!
## Interactive tutorial
{% embed url="" %}
After opening the bot for the first time using this link:
{% embed url="" %}
**Follow these steps to get set up:**
1. Press the `Start` button to load up the welcome menu
2. Upon the first start, the bot will automatically generate a fresh EVM wallet. Don't forget to **save the private key,** because **we will not be able to recover it if you lose it**
3. Accept the terms and conditions
4. The main menu will then pop up. Click "Chains", then "Solana"
5. Type in "/wallets" and click enter. Your SOL wallet will then automatically be generated - make sure to save your private key
6. Type in "/start" and press enter. You will then be prompted to select your preferred language for the bot
7. Proceed to the wallet funding tutorials below to understand how to load up your Sigma wallet!
**EVM Wallet Funding Tutorial:**
{% content-ref url="/pages/4IzeZ0J73pIXrCN29ghv" %}
[Funding or Importing From an External Wallet or Exchange](/setup-trading-and-management/evm/setup/funding-or-importing-from-an-external-wallet-or-exchange)
{% endcontent-ref %}
**SOL Wallet Funding Tutorial:**
{% content-ref url="/pages/W2OEQB037z3T2Ti1WpdA" %}
[Funding or Importing from an External Wallet or Exchange](/setup-trading-and-management/sol/setup/funding-or-importing-from-an-external-wallet-or-exchange)
{% endcontent-ref %}
{% hint style="danger" %}
Your private key provides access to your funds, you must not share your private key with others, or store in insecure places. Make sure to save it in a safe place!
{% endhint %}
# Important Links
### Sigma Trading Bot
{% embed url="" %}
### Sigma Lounge (for support and questions)
{% embed url="" %}
### Sigma Website
{% embed url="" %}
### Sigma Twitter (for announcements)
{% embed url="" %}
# FAQ
Here are some commonly-asked questions, feel free to ask any Sigma-related questions in our lounge!
I have sent some ETH to my Sigma wallet, but I can't see it in my balance!
Please do the /chains command in the bot and make sure you are on the correct chain. If you still can't see your balance after that, make sure the transactions were sent on the blockchain.
How can i see my existing tokens (that were not bought with Sigma) in the bot?
Paste the contract address of the token that you would like to see. After doing that once, you will see the token in your /positions menu
What does Alpha mode mean?
Alpha mode disables all of the security checks of the bot and lets you buy into high taxes, honeypots, blacklists etc., etc.\
Red is disabled, green is enabled.
What does FoF mean?
FoF stands for First or Fail, meaning that if you don't get the first position in the block, your transaction will fail.\
\
Red is disabled, green is enabled.
# EVM
Now that you've set up your wallets, you're ready to load up your Sigma and start trading. The following docs will walk you through every step of the process.
These guides are split by EVM and SOL - this section (EVM) covers trading all tokens on ETH, Avalanche, Binance Smart Chain, Base, Unichain, and Berachain. You can trade across all these chains using the same EVM wallet that Sigma auto-generates for you on first start.
Both EVM and SOL guides are organized into three sections to help you navigate the platform:
{% stepper %}
{% step %}
### [Setup](/setup-trading-and-management/evm/setup)
Learn how to transfer your funds into Sigma and onto the right chain before you start trading.
{% endstep %}
{% step %}
### [Trading](/setup-trading-and-management/evm/trading)
Master Sigma's signature features including auto-sniping, copy trading, limit orders, and manual buys/sells. Each guide explains the key parameters and how to configure them for your desired trading strategy.
{% endstep %}
{% step %}
### [Management](/setup-trading-and-management/evm/management)
Organize your wallets, monitor & manage positions, transfer funds between wallets/withdraw from Sigma, and customize your trading interface.
{% endstep %}
{% endstepper %}
Proceed to [Funding or Importing From an External Wallet or Exchange](/setup-trading-and-management/evm/setup/funding-or-importing-from-an-external-wallet-or-exchange), or navigate to any of the guides within these sections as required!
# Setup
Once you've started the bot and generated your wallets as per the guide in [First Start](/getting-started/setup-guide/first-start), follow these guides to deposit funds into your Sigma wallets so you can start trading:
{% content-ref url="/pages/4IzeZ0J73pIXrCN29ghv" %}
[Funding or Importing From an External Wallet or Exchange](/setup-trading-and-management/evm/setup/funding-or-importing-from-an-external-wallet-or-exchange)
{% endcontent-ref %}
{% content-ref url="/pages/WYXrfHViZC5eWyFVgh3I" %}
[Bridging From Another Chain](/setup-trading-and-management/evm/setup/bridging-from-another-chain)
{% endcontent-ref %}
# Funding or Importing From an External Wallet or Exchange
## Interactive Tutorial
{% embed url="" %}
### To transfer funds to your new Sigma wallet:
{% stepper %}
{% step %}
Open the main menu
{% endstep %}
{% step %}
**Choose a blockchain:** Select the chain you'd like to trade on
{% endstep %}
{% step %}
If you would like to transfer funds directly to the Sigma wallet from a Metamask, Exchange or other wallet, open the wallets menu and copy the public address to send from an external source
{% endstep %}
{% step %}
### If your funds are on a different chain/ network, follow this guide:
{% endstep %}
{% endstepper %}
{% content-ref url="/pages/WYXrfHViZC5eWyFVgh3I" %}
[Bridging From Another Chain](/setup-trading-and-management/evm/setup/bridging-from-another-chain)
{% endcontent-ref %}
# Bridging From Another Chain
## Interactive Tutorial
{% embed url="" %}
if your funds are on a different chain (e.g., ETH) and you want to trade on another chain (e.g., Base), use the bridge feature:
{% stepper %}
{% step %}
### Open the main menu
{% endstep %}
{% step %}
### Open the 'Bridge' menu
{% endstep %}
{% step %}
### Select the chain you'd like to bridge from
{% endstep %}
{% step %}
### Select the chain you'd like to bridge to
{% endstep %}
{% step %}
### Select the wallet you'd like to bridge from on the chosen network
{% endstep %}
{% step %}
### Enter the amount of ETH/AVAX/BNB/BASE/BERACHAIN/SOLANA you'd like to bridge
{% endstep %}
{% step %}
### Once confirmed, select the new chain via the 'Chains' menu
{% endstep %}
{% step %}
### Open the 'Wallets' menu to check the balance
{% endstep %}
{% endstepper %}
# Trading
Sigma offers several trading functionalities, and you can access them all by simply pasting a CA into the Sigma bot. Refer to the guides below for detailed walkthroughs of each Sigma feature:
{% content-ref url="/pages/bhblF6PjvFveYKBstEYg" %}
[Auto Sniper](/setup-trading-and-management/evm/trading/auto-sniper)
{% endcontent-ref %}
{% content-ref url="/pages/uY42RuELw16RTX1qKQeS" %}
[Manual Buyer](/setup-trading-and-management/evm/trading/manual-buyer)
{% endcontent-ref %}
{% content-ref url="/pages/uhrxre81T0quHeuY7iGw" %}
[Selling](/setup-trading-and-management/evm/trading/selling)
{% endcontent-ref %}
{% content-ref url="/pages/EBj5oQmZmd4i7mdaZTFk" %}
[Limit Orders](/setup-trading-and-management/evm/trading/limit-orders)
{% endcontent-ref %}
{% content-ref url="/pages/5xW96Ny6fKTYxdJiR5y7" %}
[Copy Trading](/setup-trading-and-management/evm/trading/copy-trading)
{% endcontent-ref %}
{% content-ref url="/pages/95KuFCJGJI35hAGqxkmJ" %}
[Trading Window](/setup-trading-and-management/evm/trading/trading-window)
{% endcontent-ref %}
# Auto Sniper
### Video Tutorial
{% embed url="" %}
## Quick Start
{% stepper %}
{% step %}
### Press Auto Sniper in the main menu
{% endstep %}
{% step %}
### Paste a contract address/ link that is *not* live
{% endstep %}
{% step %}
### Specify the maximum amount of ETH you would like to spend to purchase the tokens
{% endstep %}
{% step %}
### A snipe will be registered automatically with your configured settings.
{% endstep %}
{% step %}
### Any changes made to the Auto Sniper configuration are saved automatically
{% endstep %}
{% step %}
### To find all of your pending snipes click Pending Orders in the main menu
{% endstep %}
{% endstepper %}
## Interactive Tutorials
{% content-ref url="/pages/vBhYG5454B2vDQVtRbwf" %}
[Setting up an Auto Snipe](/setup-trading-and-management/evm/trading/auto-sniper/setting-up-an-auto-snipe)
{% endcontent-ref %}
{% content-ref url="/pages/jLQEDWq1UklgBYrakYxK" %}
[Broken mention](broken://pages/jLQEDWq1UklgBYrakYxK)
{% endcontent-ref %}
# Setting up an Auto Snipe
## Interactive Guide
{% embed url="" %}
### Additional information on sniping configurations and ETH-Specific configurations:
Simulation
The token is resimulated every single block, and the information gets updated automatically.\
\
Token name (Chain),\
Contract address,\
If your snipe is registered or not.\
\
Token Info:\
Buy | Sell taxes,\
Max transaction in % (if there is one),\
Deadblocks (will be set automatically),\
\
How many Sigma users are doing First or Fail on this token, (ETH mainnet only)\
\
Your active snipe settings,\
\
Useful links Wallets and Gas
Specify the wallets you would like to snipe the token with:\
\
\
Pressing All button will select all of your wallets:\
\
\
Make sure to setup enough wallets before sniping!\
\
Select the amount of Gas you would like to use for your transactions:\
\
\
The more Gas you use, the better position in the block you will get (if FoF is not active), but the transaction will cost you more.
Slippage and Antirug
You can enter a custom Slippage value by pressing Slip:\
\
\
Slippage is calculated after taxes. For example, if you plan to buy a token with 1 ETH, and there's a 50% tax on the token, your initial 1 ETH will be reduced to 0.5 ETH due to the tax. Then, the slippage is applied. Consequently, the actual minimum amount you'll end up buying may be much less than 0.5 ETH. **For tax protection you can select the maximum buy and sell taxes in the settings.**\
\
**Slippage is calculated not on token price fluctuation, but on the amount you are trying to buy. For example:**\
**You are trying to buy 1 Eth worth of Pepe and you have slippage set at 50%. This means that right after buying you are accepting that your tokens will be worth anywhere from 0.5 Eth to 1 Eth (if taxes are at 0%)**\
\
**Keep in mind, there is no anti-mev on Binance Smart Chain, so please use Slippage!**\
\
**On Ethereum, the AntiRug setting can be toggled on/off:**
AntiRug is an all-in-one protection from all the things that are nasty - rugs, taxes, blacklists and everything in-between. You can enable/disable it by clicking this button:  **AntiRug will sell on high-impact sells, for example if dev dumps 10 wallets at once, the bot will frontrun these transactions.** Red is disabled, green is enabled.
MaxTX and MinTokens
MaxTx enabled (green) - let’s say the token has a max transaction of 1% and you select a buy amount of 0.3 ETH. If the 1% of the tokens supply is more expensive than 0.3 ETH, the transaction will fail. If the price is below 0.3 ETH, the transaction will succeed.\
\
\
MaxTx disabled (red) - let’s say the token has a max transaction of 1% and you select a buy amount of 0.3 ETH. If the 1% of the tokens supply is more expensive than 0.3 ETH, the transaction will **still go through**. You will buy tokens worth 0.3 ETH and the supply you buy will be less than 1%.\
\
\
MaxTx limits your risk when buying very volatile tokens. If the token does not have a maximum transaction amount set up, this feature will not be used.\
\
To enable MinTokens, click on the button and enter your desired supply %:
When MinTokens is enabled, the bot will try to buy the supply you entered **or more** for the Buy amount you selected.\
\
For example, your buy amount is 0.2 ETH and you wish to purchase **at least** 10% of the total supply for the 0.2 ETH. In this case, you will get 10% of the supply (**or more**), or your transaction will fail.\
\
Red is disabled, green is enabled.
FoF and Pre-Approve
FoF stands for First or Fail, meaning that if you don't get first position in the block, your transaction will fail. \
Red is disabled, green is enabled.\
\
You will see how many fellow Sigma members are sniping the specific token using FoF at the top of the menu:
Clicking Pre-Approve sends out an approve transaction before the token goes live.\
\
\
By pre-approving your transaction before the token launches, you can sell your tokens one block faster, as the approval is already in place when the token becomes live.\
\
**FoF and bundles are only available on Ethereum**
Settings
To access the settings, click on the 🔧Settings button:
There are a few interesting settings that need some explanation:
**Min Liquidity -** if the token developer adds an amount lower than you specified to the liquidity pool, your transactions will not be sent. Transactions will be sent when the requirements are met. Amount is written in USD.\
\
For example, you have set Min Liquidity at 1000, and the developer adds 0.2 ETH to liquidity, in that case, your transactions will not be sent. Transactions will be sent when the requirements are met.\
\
**Buy/Sell Tax** - maximum amount of tax that your poor soul can tolerate. If buy/sell of a token is higher than your set amounts, your transactions will not be sent. Transactions will be sent when the requirements are met.\
\
For example, you have set Buy Tax at 10%, Sell Tax at 5%, the developer launches with 2% buy tax, which complies with your settings, and 7% sell tax, which is the reason why your transactions will not be sent. Transactions will be sent when the requirements are met.\
\
When Alpha mode is enabled (green) all of the security checks of the bot are DISABLED and you will NOT be protected from high taxes, honeypots, blacklists etc., etc. Red is disabled, green is enabled.\
\
**Backup -** Backup transaction in case your main one fails. That can happen if the developer decides to launch using Private transaction, or if the simulations sees some deadblocks. Backup transactions will help you get in in these cases. Backup transactions will use your Backup Mev gas amount (in settings), so don't forget to set it.\
Red is disabled, green is enabled. (available on ETH only)
# Manual Buyer
### Video Tutorial
{% embed url="" %}
## Quick Start
{% stepper %}
{% step %}
### Select Manual Buyer in the main menu
{% endstep %}
{% step %}
### Paste a live contract address/ link
{% endstep %}
{% step %}
### Customise gas and slippage
{% endstep %}
{% step %}
### Select an ETH amount to send the transaction
{% endstep %}
{% endstepper %}
## Interactive tutorials
{% content-ref url="/pages/VAcazZiwD5SwvtFIzCz0" %}
[Sending a Manual Buy](/setup-trading-and-management/evm/trading/manual-buyer/sending-a-manual-buy)
{% endcontent-ref %}
{% content-ref url="/pages/cKS0o8Q0020A9PYDqOuC" %}
[Manual Buy Configurations](/setup-trading-and-management/evm/trading/manual-buyer/manual-buy-configurations)
{% endcontent-ref %}
{% content-ref url="/pages/AbD9eJ9ur7kMw7aEXwkX" %}
[Buy Orders](/setup-trading-and-management/evm/trading/limit-orders/buy-orders)
{% endcontent-ref %}
{% hint style="info" %}
Use our new /closeall command and clear every un-traded token from your window.
{% endhint %}
# Sending a Manual Buy
{% embed url="" %}
{% content-ref url="/pages/cKS0o8Q0020A9PYDqOuC" %}
[Manual Buy Configurations](/setup-trading-and-management/evm/trading/manual-buyer/manual-buy-configurations)
{% endcontent-ref %}
IMPORTANT: Low Liquidity Warning
**What it means:** The token you're trying to trade has much less available liquidity on Sigma than what shows on chart websites.
**Why this happens:** Chart sites show total liquidity across all pools, but Sigma might only support the smaller pools for this token.
**The risk:** If you trade based on the high liquidity you saw elsewhere, you could lose significant money due to price impact.
**What to do:**
* Check the actual available liquidity on Sigma before trading
* Consider reducing your trade size
* Verify liquidity details on trusted sources
**Note:** Enabling Alpha Mode turns off this protection. Only use it if you understand and accept these risks.
# Manual Buy Configurations
{% embed url="" %}
# Selling
## Video Tutorial
{% embed url="" %}
## Quick Sell Guide
{% stepper %}
{% step %}
### A sell menu is opened automatically after you buy or snipe a token
{% endstep %}
{% step %}
### To retrieve a position or re-open the sell menu, paste a contract address/link of a token that your Sigma wallets own
{% endstep %}
{% step %}
### Select gas and slippage for the sell transaction
{% endstep %}
{% step %}
### Select the wallet you would like to sell with
{% endstep %}
{% step %}
### Press any of the buttons with a [💰](https://emojipedia.org/money-bag) icon to sell a position
{% endstep %}
{% endstepper %}
## Interactive tutorial
{% content-ref url="/pages/pjpqXZHKCVJiPuSGAIcQ" %}
[Sending a Sell Transaction](/setup-trading-and-management/evm/trading/selling/sending-a-sell-transaction)
{% endcontent-ref %}
{% content-ref url="/pages/QscbXaOQNdpphuat0FZn" %}
[Sell Orders](/setup-trading-and-management/evm/trading/limit-orders/sell-orders)
{% endcontent-ref %}
# Sending a Sell Transaction
Interactive tutorial
{% embed url="" %}
### Additional information
Slippage
Slippage is calculated after taxes. For example, if you plan to sell a token for 1 ETH, and there's a 50% tax on the token, your initial 1 ETH will be reduced to 0.5 ETH due to the tax. Then, the slippage is applied. Consequently, the actual minimum amount you'll end up selling may be much less than 0.5 ETH.
**For tax protection you can select the maximum buy and sell taxes in the settings. Slippage is calculated not on token price fluctuation, but on the amount you are trying to sell. For example: You are trying to sell 1 Eth worth of Pepe and you have slippage set at 50%. This means that right after selling you are accepting that your tokens will be worth anywhere from 0.5 Eth to 1 Eth (if taxes are at 0%)**
**Keep in mind, there is no anti-mev on Binance Smart Chain, so please use Slippage!**
Gas
Select the amount of Gas you would like to use for your transactions by pressing the ⛽️GWEI button. The more Gas you use, the better position in the block you will get, but the transaction will cost you more.
{% content-ref url="/pages/QscbXaOQNdpphuat0FZn" %}
[Sell Orders](/setup-trading-and-management/evm/trading/limit-orders/sell-orders)
{% endcontent-ref %}
# Limit Orders
Limit Orders allow trades to be executed automatically, a convenient option to free up your time to focus on other aspects of your trading and practise risk management.
### Video Tutorial
Sigma supports a variety of different limit orders, including:
• Take profit orders
• Stop losses
• Dip buys
### Quick Limit Order Guide
{% stepper %}
{% step %}
### Within the buy and sell menus, click the 📈Limit Order button
{% endstep %}
{% step %}
### A limit order menu will be opened, select the conditions for the limit order to be executed
{% endstep %}
{% step %}
### Press any of the 💰 buy/sell buttons to register the limit order
{% endstep %}
{% step %}
### All orders can be viewed in the 🕒 Pending Orders section of the main menu
{% endstep %}
{% endstepper %}
## Interactive Guides
{% content-ref url="/pages/AbD9eJ9ur7kMw7aEXwkX" %}
[Buy Orders](/setup-trading-and-management/evm/trading/limit-orders/buy-orders)
{% endcontent-ref %}
{% content-ref url="/pages/QscbXaOQNdpphuat0FZn" %}
[Sell Orders](/setup-trading-and-management/evm/trading/limit-orders/sell-orders)
{% endcontent-ref %}
# Buy Orders
## Interactive Guide
{% embed url="" %}
# Sell Orders
## Interactive Guide
{% embed url="" %}
Multiple orders
You can set as many simultaneous orders as you like in the bot, just keep entering your desired settings and creating orders!
# Copy Trading
## Video Tutorial
{% embed url="" %}
### Quick Start
{% stepper %}
{% step %}
### Select Copy Trading in the main menu
{% endstep %}
{% step %}
### Select the chain you would like to copy trades on
{% endstep %}
{% step %}
### Add a new wallet to copy
{% endstep %}
{% step %}
### Configure your desired settings for the copy trading function
{% endstep %}
{% step %}
### Click Start Copying to register the copy trade
{% endstep %}
{% step %}
### You can reconfigure your settings at any time, click the update changes button to save the changes.
{% endstep %}
{% endstepper %}
## Interactive guides
# Setting up a Copy Trade
## Interactive Tutorial
{% embed url="" %}
### Click here for additional information on the Copy Trading Settings:
{% content-ref url="/pages/RJuPw5BXoGhAksALZ2ap" %}
[Copy Trading Configurations](/setup-trading-and-management/evm/trading/copy-trading/copy-trading-configurations)
{% endcontent-ref %}
# Copy Trading Configurations
{% embed url="" %}
Amount modes
Min - If you choose to have the Min mode enabled, the bot will decide the amount to buy between two amounts - your Max Amount that you have set in the bot, and the amount of the wallet that you are copying. The bot will choose whichever value is lower out of the two.
For example, you have Max Amount set at 1 ETH, and the wallet that you are copying buys with 2 ETH, so the bot will buy 1 ETH, as it is the lower value of the two. If you have Max Amount set at 1 ETH, and the wallet that you are copying buys with 0.5 ETH, so the bot will buy 0.5 ETH, as it is the lower value of the two.
Max - If you choose to have the Max mode enabled, bot will only buy up to your Max Amount.
For example, you have Max Amount set at 1 ETH, and the wallet that you are copying buys with 2 ETH, so the bot will buy 1 ETH. If you have Max Amount set at 1 ETH, and the wallet that you are copying buys with 0.5 ETH, so the bot will buy 1 ETH.
Copy Sell
Copy Sell will let you mirror the sells of the wallet that you are copying. You can select the desired amount that you wish to copy. For example, if you would like to leave a moonbag for all the tokens the wallet buys, just set 80-90% on the Copy Sell setting. The wallet you are copying will have sold all of his tokens, but you will still have 10-20% remaining.
Gas
Select the amount of Gas you would like to use for your transactions. The more Gas you use, the better position in the block you will get, but the transaction will cost you more.
Settings
There are a few interesting settings that need some extra explanation:
**AntiRug** (**not available on some chains**) is an all-in-one protection from all the things that are nasty - rugs, taxes, blacklists and everything in-between. You can enable/disable it by clicking this button:
**AntiRug will sell on high-impact sells, for example if dev dumps 10 wallets at once, the bot will frontrun these transactions.**
Red is disabled, green is enabled.
**Buy/Sell Tax** - maximum amount of tax that your poor soul can tolerate. If buy/sell of a token is higher than your set amounts, your transactions will not be sent. Transactions will be sent when the requirements are met.
For example, you have set Buy Tax at 10%, Sell Tax at 5%, the developer launches with 2% buy tax, which complies with your settings, and 7% sell tax, which is the reason why your transactions will not be sent. Transactions will be sent when the requirements are met.
**Min Wallet Balance** - This USD value controls the minimum amount of balance a wallet should hold for a buy to trigger. If balance is below this threshold a buy will not trigger.
**Min Liquidity** - if the token developer adds an amount lower than you specified to the liquidity pool, your transactions will not be sent. Transactions will be sent when the requirements are met. Amount is written in USD.
For example, you have set Min Liquidity at 1000, and the developer adds 0.2 ETH to liquidity, in that case, your transactions will not be sent. Transactions will be sent when the requirements are met.
**Alpha** mode disables all of the security checks of the bot and lets you buy into high taxes, honeypots, blacklists etc., etc. Red is disabled, green is enabled.
**Buy Once** - You will buy a token only one time. If the wallet you are copy trading buys the same token multiple times, you will only copy the first purchase. Red is disabled, green is enabled.
**Min Mcap** - This sets the minimum market cap of a token in order to trigger the copy trade. If the market cap is below this value and this setting is active, the buy will not trigger. Amount is written in USD.
**Max Mcap** - This sets the maximum market cap that a token can have. If market cap is above this value and this setting is active, the buy will not trigger. Amount is written in USD.
Slippage
Slippage is calculated after taxes. For example, if you plan to buy a token with 1 ETH, and there's a 50% tax on the token, your initial 1 ETH will be reduced to 0.5 ETH due to the tax. Then, the slippage is applied. Consequently, the actual minimum amount you'll end up buying may be much less than 0.5 ETH. **For tax protection you can select the maximum buy and sell taxes in the settings.**
**Slippage is calculated not on token price fluctuation, but on the amount you are trying to buy. For example: You are trying to buy 1 Eth worth of Pepe and you have slippage set at 50%. This means that right after buying you are accepting that your tokens will be worth anywhere from 0.5 Eth to 1 Eth (if taxes are at 0%)**
**Keep in mind, there is no anti-mev on Binance Smart Chain, so please use Slippage!**
# Trading Window
## Interactive walkthrough
{% embed url="" %}
# Management
With Sigma, managing your wallets, funds, and positions is effortless. And, for a personalized trading experience, you can customize the look and feel of your trading monitor. Refer to the guides below:
{% content-ref url="/pages/EVBgXCogCNt38uUnxUof" %}
[Wallets](/setup-trading-and-management/evm/management/wallets)
{% endcontent-ref %}
{% content-ref url="/pages/b1FuOnOembQIAoJCemwF" %}
[Positions](/setup-trading-and-management/evm/management/positions)
{% endcontent-ref %}
{% content-ref url="/pages/ynWxkYHancyREVbTCFQ3" %}
[Settings](/setup-trading-and-management/evm/management/settings)
{% endcontent-ref %}
{% content-ref url="/pages/0eg1h0wwRsuH5ZylREGY" %}
[Transferring](/setup-trading-and-management/evm/management/transferring)
{% endcontent-ref %}
# Wallets
{% hint style="info" %}
One of the first steps you should do after starting the bot is setting up all of your wallets. You can find the wallet settings here:
{% endhint %}
#### To set up and fund your first wallet, check this section of our documentation:
{% content-ref url="/pages/SM3qdu3XpWLGFoub6inT" %}
[Setup Guide](/getting-started/setup-guide)
{% endcontent-ref %}
## Interactive Wallet Configuration Guide
{% embed url="" %}
# Positions
{% embed url="" %}
To look at all your current positions:
{% stepper %}
{% step %}
### Open the menu and click 'Positions'
{% endstep %}
{% step %}
### This will show all of your current positions
{% endstep %}
{% step %}
### Click on any to expand the buy/sell menus
{% endstep %}
{% endstepper %}
# Settings
## Interactive Guide
{% embed url="" %}
### Within the Settings menu, you can customize:
{% stepper %}
{% step %}
### Default Trading Values
{% endstep %}
{% step %}
### Enable/ Disable Trade Confirmation Messages
{% endstep %}
{% step %}
### Default Gas Buttons
{% endstep %}
{% step %}
### Default Buy Buttons
{% endstep %}
{% step %}
### Enable and Configure Auto Buy
{% endstep %}
{% step %}
### Menu Language
{% endstep %}
{% endstepper %}
# Transferring
Transferring is made easy with Sigma! You can transfer any cryptocurrency you own to anywhere you want!
## Tokens
{% embed url="" %}
## Funds
{% embed url="" %}
# SOL
Now that you've set up your wallets, you're ready to load up your Sigma and start trading. The following docs will walk you through every step of the process.
These guides are split by SOL and EVM - this section (SOL) covers trading all tokens on Solana. Both EVM and SOL guides are organized into three sections to help you navigate the platform:
{% stepper %}
{% step %}
### [Setup](/setup-trading-and-management/sol/setup)
Learn how to transfer your funds into Sigma and onto the right chain before you start trading.
{% endstep %}
{% step %}
### [Trading](/setup-trading-and-management/sol/trading)
Master Sigma's signature trading features. Each guide explains the key parameters and how to configure them for your desired trading strategy.
{% endstep %}
{% step %}
### [Management](/setup-trading-and-management/sol/management)
Organize your wallets, monitor & manage positions, transfer funds between wallets/withdraw from Sigma, and customize your trading interface.
{% endstep %}
{% endstepper %}
Proceed to [Funding or Importing from an External Wallet or Exchange](/setup-trading-and-management/sol/setup/funding-or-importing-from-an-external-wallet-or-exchange)to fund your wallet, or navigate to any of the guides within these sections as required!
# Setup
Once you have started the bot and generated your wallets as per the guide in [First Start](/getting-started/setup-guide/first-start), follow these guides to deposit funds into your Sigma wallets so you can start trading:
{% content-ref url="/pages/W2OEQB037z3T2Ti1WpdA" %}
[Funding or Importing from an External Wallet or Exchange](/setup-trading-and-management/sol/setup/funding-or-importing-from-an-external-wallet-or-exchange)
{% endcontent-ref %}
{% content-ref url="/pages/YJtCWJvlb5Rhcx3LXI74" %}
[Bridging From Another Chain](/setup-trading-and-management/sol/setup/bridging-from-another-chain)
{% endcontent-ref %}
# Funding or Importing from an External Wallet or Exchange
## Interactive Tutorial
{% embed url="" %}
### To transfer funds to your new Sigma wallet:
{% stepper %}
{% step %}
Open the main menu
{% endstep %}
{% step %}
**Choose a blockchain:** Select Solana
{% endstep %}
{% step %}
If you would like to transfer funds directly to the Sigma wallet from a Metamask, Exchange or other wallet, open the wallets menu and copy the public address to send from an external source. Your balance is displayed above the address.
{% endstep %}
{% step %}
### If your funds are on a different chain/ network, follow this guide:
{% endstep %}
{% endstepper %}
{% content-ref url="/pages/YJtCWJvlb5Rhcx3LXI74" %}
[Bridging From Another Chain](/setup-trading-and-management/sol/setup/bridging-from-another-chain)
{% endcontent-ref %}
# Bridging From Another Chain
## Interactive Tutorial
{% embed url="" %}
If your funds are on a different chain (e.g., ETH/EVM chains) and you want to trade on another chain (e.g., SOL), use the bridge feature:
{% stepper %}
{% step %}
### Open the main menu
{% endstep %}
{% step %}
### Open the 'Bridge' menu
{% endstep %}
{% step %}
### Select the chain you'd like to bridge from
{% endstep %}
{% step %}
### Select Solana as the chain to bridge to
{% endstep %}
{% step %}
### Select the Solana wallet you'd like to bridge from
{% endstep %}
{% step %}
### Enter the amount of ETH/AVAX/BNB/BASE/BERACHAIN you'd like to bridge
{% endstep %}
{% step %}
### Once confirmed, select Solana via the 'Chains' menu
{% endstep %}
{% step %}
### Open the 'Wallets' menu to check the balance
{% endstep %}
{% endstepper %}
# Trading
Sigma offers several trading functionalities, and you can access them all by simply pasting a CA into the Sigma bot. Refer to the guides below for detailed walkthroughs of each Sigma feature:
{% content-ref url="/pages/SECPu3BmAsdq9QAs0bky" %}
[Manual Buyer](/setup-trading-and-management/sol/trading/manual-buyer)
{% endcontent-ref %}
{% content-ref url="/pages/twsguXdyyQlwAk1Iz2v9" %}
[Selling](/setup-trading-and-management/sol/trading/selling)
{% endcontent-ref %}
{% content-ref url="/pages/xitaEvodQ0QLVnKfuLRn" %}
[Limit Orders](/setup-trading-and-management/sol/trading/limit-orders)
{% endcontent-ref %}
{% content-ref url="/pages/95KuFCJGJI35hAGqxkmJ" %}
[Trading Window](/setup-trading-and-management/evm/trading/trading-window)
{% endcontent-ref %}
# Manual Buyer
### Video Tutorial
{% embed url="" %}
## Quick Start
{% stepper %}
{% step %}
### Paste a token contract address
{% endstep %}
{% step %}
### Customise gas, slippage and an anti-MEV tip (see explainer of these terms in "Sending a Manual Buyer" guide)
{% endstep %}
{% step %}
### Select a SOL amount to send the transaction
{% endstep %}
{% endstepper %}
## Interactive tutorials
{% content-ref url="/pages/JTgMdM0nx8dhg52CVnGq" %}
[Sending a Manual Buy](/setup-trading-and-management/sol/trading/manual-buyer/sending-a-manual-buy)
{% endcontent-ref %}
{% content-ref url="/pages/ZXSfnWcekfRoInb8YAbs" %}
[Manual Buy Configurations](/setup-trading-and-management/sol/trading/manual-buyer/manual-buy-configurations)
{% endcontent-ref %}
{% content-ref url="/pages/BNIjqOwqdg7VRllBgjdG" %}
[Buy Orders](/setup-trading-and-management/sol/trading/limit-orders/buy-orders)
{% endcontent-ref %}
{% hint style="info" %}
Use our new /closeall command and clear every un-traded token from your window.
{% endhint %}
# Sending a Manual Buy
{% embed url="" %}
Slippage
Slippage is the difference between the price you anticipate for a trade and the actual price at which it executes, often influenced by market volatility or low liquidity.
A higher slippage setting can speed up trade execution but increases the risk of being sandwiched (leading to unfavorable prices and reduced returns). A lower slippage setting reduces these risks but may prevent the tx from executing.
Gas
Gas is the fee for processing Solana transactions. The more gas you use, the faster your tx will be processed.
MEV Protection and Anti-MEV Tips
When you use high slippage, your tx becomes susceptible to sandwich attacks. A sandwich attack is when MEV bots see your tx, buy ahead of you, raise the price, then sell after, making you pay a higher price and lowering your returns.
MEV protection on Sigma shields you from this by routing your txs through private relays, but may make your tx slower. Adding an anti-MEV tip prioritizes your tx being processed when MEV protection is on.
IMPORTANT: Low Liquidity Warning
**What it means:** The token you're trying to trade has a very small liquidity pool, meaning you could lose significant money due to price impact. This could be because the token is extremely new - or, sometimes, Sigma may not support the pools you see on chart websites and only supports the smaller pools for this token.
**What to do:**
* Check the actual available liquidity on Sigma before trading
* Consider reducing your trade size
* Verify liquidity details on trusted sources
Multiple tokens
If you want to open a new menu for a different token, simply paste the contract address of a different token. Sigma allows you to have multiple trades active at the same time - all the tokens you've been looking at will appear in the trading window, and you can click on the token name that you would like to access.
If you would like to clear the selection of tokens, type in /closeall and press enter. Then, when you paste in a CA again, you will no longer see the old tokens.\
{% content-ref url="/pages/ZXSfnWcekfRoInb8YAbs" %}
[Manual Buy Configurations](/setup-trading-and-management/sol/trading/manual-buyer/manual-buy-configurations)
{% endcontent-ref %}
# Manual Buy Configurations
{% embed url="" %}
# Selling
## Video Tutorial
{% embed url="" %}
## Quick Sell Guide
{% stepper %}
{% step %}
### A sell menu is opened automatically after you buy a token
{% endstep %}
{% step %}
### To retrieve a position or re-open the sell menu, paste a contract address/link of a token that your Sigma wallets own
{% endstep %}
{% step %}
### Select gas, slippage and an anti-MEV tip for the sell transaction
{% endstep %}
{% step %}
### Select the wallet you would like to sell with
{% endstep %}
{% step %}
### Press any of the buttons with a [💰](https://emojipedia.org/money-bag) icon to sell a position
{% endstep %}
{% endstepper %}
## Interactive tutorial
{% content-ref url="/pages/dwrO7CHLH3WgtCuJ2hrk" %}
[Sending a Sell Transaction](/setup-trading-and-management/sol/trading/selling/sending-a-sell-transaction)
{% endcontent-ref %}
{% content-ref url="/pages/muST33lVahgDTjMd6qQ9" %}
[Sell Orders](/setup-trading-and-management/sol/trading/limit-orders/sell-orders)
{% endcontent-ref %}
# Sending a Sell Transaction
Interactive tutorial
{% embed url="" %}
### Additional information
Slippage
Slippage is the difference between the price you anticipate for a trade and the actual price at which it executes, often influenced by market volatility or low liquidity.
A higher slippage setting can speed up trade execution but increases the risk of being sandwiched (leading to unfavorable prices and reduced returns). A lower slippage setting reduces these risks but may prevent the tx from executing.
Gas
Gas is the fee for processing Solana transactions. The more gas you use, the faster your tx will be processed.
MEV Protection and Anti-MEV Tips
When you use high slippage, your tx becomes susceptible to sandwich attacks. A sandwich attack is when MEV bots see your tx, buy ahead of you, raise the price, then sell after, making you pay a higher price and lowering your returns.
MEV protection on Sigma shields you from this by routing your txs through private relays, but may make your tx slower. Adding an anti-MEV tip prioritizes your tx being processed when MEV protection is on.
IMPORTANT: Low Liquidity Warning
**What it means:** The token you're trying to trade has a very small liquidity pool, meaning you could lose significant money due to price impact. This could be because the token is extremely new - or, sometimes, Sigma may not support the pools you see on chart websites and only supports the smaller pools for this token.
**What to do:**
* Check the actual available liquidity on Sigma before trading
* Consider reducing your trade size
* Verify liquidity details on trusted sources
{% content-ref url="/pages/muST33lVahgDTjMd6qQ9" %}
[Sell Orders](/setup-trading-and-management/sol/trading/limit-orders/sell-orders)
{% endcontent-ref %}
# Limit Orders
Limit Orders allow trades to be executed automatically, a convenient option to free up your time to focus on other aspects of your trading and practise risk management.
### Video Tutorial
Sigma supports a variety of different limit orders, including:
• Take profit orders
• Stop losses
• Dip buys
### Quick Limit Order Guide
{% stepper %}
{% step %}
### Within the buy and sell menus, click the 📈Limit Order button
{% endstep %}
{% step %}
### A limit order menu will be opened, select the conditions for the limit order to be executed
{% endstep %}
{% step %}
### Press any of the 💰 buy/sell buttons to register the limit order
{% endstep %}
{% step %}
### All orders can be viewed in the 🕒 Pending Orders section of the main menu
{% endstep %}
{% endstepper %}
## Interactive Guides
{% content-ref url="/pages/BNIjqOwqdg7VRllBgjdG" %}
[Buy Orders](/setup-trading-and-management/sol/trading/limit-orders/buy-orders)
{% endcontent-ref %}
{% content-ref url="/pages/muST33lVahgDTjMd6qQ9" %}
[Sell Orders](/setup-trading-and-management/sol/trading/limit-orders/sell-orders)
{% endcontent-ref %}
# Buy Orders
## Interactive Guide
{% embed url="" %}
Slippage
Slippage is the difference between the price you anticipate for a trade and the actual price at which it executes, often influenced by market volatility or low liquidity.
A higher slippage setting can speed up trade execution but increases the risk of being sandwiched (leading to unfavorable prices and reduced returns). A lower slippage setting reduces these risks but may prevent the tx from executing.
Gas
Gas is the fee for processing Solana transactions. The more gas you use, the faster your tx will be processed.
MEV Protection and Anti-MEV Tips
When you use high slippage, your tx becomes susceptible to sandwich attacks. A sandwich attack is when MEV bots see your tx, buy ahead of you, raise the price, then sell, making you pay a higher price and lowering your returns.
MEV protection on Sigma shields you from this by routing your txs through private relays, but may make your tx slower. Adding an anti-MEV tip prioritizes your tx being processed when MEV protection is on.
# Sell Orders
## Interactive Guide
{% embed url="" %}
Multiple orders
You can set as many simultaneous orders as you like in the bot, just keep entering your desired settings and creating orders!
Slippage
Slippage is the difference between the price you anticipate for a trade and the actual price at which it executes, often influenced by market volatility or low liquidity.
A higher slippage setting can speed up trade execution but increases the risk of being sandwiched (leading to unfavorable prices and reduced returns). A lower slippage setting reduces these risks but may prevent the tx from executing.
Gas
Gas is the fee for processing Solana transactions. The more gas you use, the faster your tx will be processed.
MEV Protection and Anti-MEV Tips
When you use high slippage, your tx becomes susceptible to sandwich attacks. A sandwich attack is when MEV bots see your tx, buy ahead of you, raise the price, then sell after, making you pay a higher price and lowering your returns.
MEV protection on Sigma shields you from this by routing your txs through private relays, but may make your tx slower. Adding an anti-MEV tip prioritizes tx being processed when MEV protection is on.
# Trading Window
## Interactive walkthrough
{% embed url="" %}
# Management
With Sigma, managing your wallets, funds, and positions is effortless. And, for a personalized trading experience, you can customize the look and feel of your trading monitor. Refer to the guides below:
{% content-ref url="/pages/bf5pnpeNwsGKGvBBSmii" %}
[Wallets](/setup-trading-and-management/sol/management/wallets)
{% endcontent-ref %}
{% content-ref url="/pages/0GUU28k0GiNkup11HV1W" %}
[Positions](/setup-trading-and-management/sol/management/positions)
{% endcontent-ref %}
{% content-ref url="/pages/BtLoHzpJ3JeOjlpsOB53" %}
[Settings](/setup-trading-and-management/sol/management/settings)
{% endcontent-ref %}
{% content-ref url="/pages/ALVu94wn16BxrQjquN1J" %}
[Transferring](/setup-trading-and-management/sol/management/transferring)
{% endcontent-ref %}
# Wallets
{% hint style="info" %}
One of the first steps you should do after starting the bot is setting up all of your wallets. You can find the wallet settings here:
{% endhint %}
#### To set up and fund your first wallet, check this section of our documentation:
{% content-ref url="/pages/SM3qdu3XpWLGFoub6inT" %}
[Setup Guide](/getting-started/setup-guide)
{% endcontent-ref %}
## Interactive Wallet Configuration Guide
{% embed url="" %}
# Positions
{% embed url="" %}
To look at all your current positions:
{% stepper %}
{% step %}
### Open the menu and click 'Positions'
{% endstep %}
{% step %}
### This will show all of your current positions
{% endstep %}
{% step %}
### Click on any token name to expand the buy/sell menus
{% endstep %}
{% endstepper %}
# Settings
Interactive Guide
{% embed url="" %}
### Within the Settings menu, you can customize:
{% stepper %}
{% step %}
### Default Trading Values
**Sell Fee:** Your default gas on sell txs
**Price Impact:** The maximum token price % change because of your tx that you're willing to accept
**Min Liquidity:** The minimum amount of pooled SOL in the token's liquidity pool required for your tx to execute
**AntiMev / AntiMev Tips:** When you use high slippage, your tx becomes susceptible to sandwich attacks. MEV protection on Sigma shields you from this by routing your txs through private relays, but may make your tx slower. Adding an anti-MEV tip prioritizes your tx being processed when MEV protection is on.
{% endstep %}
{% step %}
### Enable/Disable Trade Confirmation Messages
{% endstep %}
{% step %}
### Default Gas Buttons
{% endstep %}
{% step %}
### Default Buy Buttons
{% endstep %}
{% step %}
### Enable and Configure Auto Buy
{% endstep %}
{% step %}
### Whether to Auto-Generate PnL Cards
{% endstep %}
{% step %}
### Menu Language
{% endstep %}
{% endstepper %}
# Transferring
Transferring is made easy with Sigma! You can transfer any cryptocurrency you own to anywhere you want!
## Tokens
{% embed url="" %}
## Funds
{% embed url="" %}
# Referrals
Refer your friends and earn: Sigma is offering the highest returns on referrals in the market, sharing 20% of our revenue with you!
## Interactive Guide
{% embed url="" %}
# Point System
An advanced point system has been implemented into the bot. Trading, sniping, referring friends, doing daily tasks and many other activities will give you a different amount of points.
{% hint style="info" %}
**Be active! The higher the level you reach, the better and more interesting rewards you will receive!**
{% endhint %}
To access the points menu, Select Refer & Play in the main menu:
Then click War Room:
You will be able to see the daily missions and your stats in the menu:
Select Rewards in the Refer & Play menu to see what you have unlocked based on your level:
Good luck and have fun on the battlefield!
# Backup Bots
If the main bot is getting slow or buggy, /start the bot and click Backup Bots or type /bots in the main bot window:
Click on any of the Backup Bots:
All the bots have the same speed and all your settings saved, so there is no difference in which one you pick. Use the one that runs the smoothest for you.
# Chains
Currently available chains:
• Ethereum
• Base Chain
• Binance Smart Chain
• Avalanche
•Blast Chain
• Arbitrum
• Solana
**Chain will be detected automatically upon pasting the contract address into the bot!**
Your settings for the bot are chain specific, so you will need to switch the chain to change them.
To change chain, Click Chains in the main menu.
And select the preferred chain:
# Fees
#### Current bot fees:
Chain
Sniping
Trading
Ethereum
1%
1%
Avalanche
1%
1%
Binance Smart Chain
1%
1%
Unichain
1%
1%
Base Chain
1%
1%
Berachain
1%
1%
Solana
-
0%
# Key Features
* Ethereum, Avalanche, Binance Smart Chain, Base Chain, Unichain, Berachin and Solana compatible
* Automatic chain detection
* Mev & re-org protection
* No gas fees lost on failed transactions
* Lowest bot fees on the market
* Convenient and fast UI
* Stop loss/Take profit/Buy orders for all tokens
* Bulletproof code that has been battle-tested for years
* One of the best contract simulators on the market
* Most advanced Anti-Rug system in the game
* Full Virtual protocol integration (pre and post bond)
* Full Ape.store integration (pre and post bond)
# Roadmap